Search
Български

Строителни материали / абразиви

Temperature monitoring and control with the new mixer mill MM 500 control

There is a wide variety of solid samples that require homogenization for subsequent analysis. The temperature at which the grinding processes take place can play an important role for various reasons. Generally, heat is generated during the grinding of solids. This is problematic if highly volatile components or other ingredients of the sample are to be preserved for subsequent analyses. For these applications RETSCH has developed the new Mixer Mill MM 500 control, which can cool two grinding jar positions with grinding jars up to max. 125 ml simultaneously. The heart of the MM 500 control are the flexible tempering options.

Назад към общия преглед

Лист с техническа информация (2)

  • White Paper. Different sieving methods for a variety of applications

    The determination and knowledge of the particle size distribution is an essential part of the quality control process for industrial products. Easy handling, low investment cost and high accuracy make sieve analysis one of the most frequently used procedures for measuring the particle size. This white paper gives an overview of the different sieving techniques and describes the necessary steps to ensure reliable results.

  • White Paper: Ultrafine Grinding with Laboratory Ball Mills

    How are nano particles produced? The “Bottom-Up” method synthesizes particles from atoms or molecules. The “Top-Down” method involves reducing the size of larger particles to nanoscale, for example with laboratory mills. Nano particles are produced by colloidal grinding which involves dispersion of the particles in liquid to neutralize the surface charges. Factors such as energy input and size reduction principle make ball mills the best choice for the production of nanoparticles.

Лифлети (2)

Приложени доклади (10)

  • Air Jet Sieving of Bulk Materials

    Particle size analysis and particle size distribution are important criteria for the quality control of bulk materials. In a running production process, the results of a quality check must be available quickly to allow for immediate adjustment of the production parameters. Depending on the expected particle size and sample volume, different sieving methods and sieving machines are suitable for analysis. The method used for particle size analysis is primarily determined by the fineness of the material to be sieved. For dry sieving of samples with particle sizes below 40 microns, air jet sieving is the method of choice.

  • Fast, fine and reproducible - Sample Prep for XRF Analysis

    The overall procedure of X-ray fluorescence analysis may be divided into three different stages: sampling, sample preparation and the actual spectrometric analysis itself. Of these three, it is usually the mechanical sample preparation that takes up most of the time and will therefore be discussed in this application report.

  • Mixer Mill MM 400: Upgrade of a True Multipurpose Mill

    With the Mixer Mill MM 400 RETSCH has developed a true multipurpose mill which covers a huge range of applications, including classic mixing and homogenization but also more complex tasks like cell disruption via bead beating or mechanochemical processes. The ease of use of mixer mills in general, combined with a wealth of accessories make the MM 400 the perfect choice for quick, safe and reproducible processing of small sample volumes.

  • Representative results require adequate sample preparation

    The following situation is typical for many production plants: After a routine quality check, the production process is stopped or an already produced batch is suspended, because the analysis results were not within the relevant critical values. But does the tested product really deviate from the specifications? It is often not the product itself which causes irregular analysis results but a lack of understanding of the steps which come before the analysis.

  • Sample Division of Large Volumes

    Representative sampling of large sample volumes is an integral part of the physical and chemical analysis of bulk goods and has a decisive influence on the quality of the results. Extraction of a sample from the bulk is not always carried out in a way to ensure representativeness. This is a widespread flaw in the quality control process with a negative impact on the subsequent analysis results. RETSCH provides some convenient solutions which help to improve working conditions and thereby the quality of the sampling process.

  • Sample Preparation for X-Ray Diffraction Analysis

    The XRD-Mill McCrone preserves the crystal lattice structure of the sample - With resources becoming increasingly scarce, innovative technologies allowing for sustainable use of raw materials are much sought after. The mineralogist Dr. Robert Moeckel is researching mineral and metallic raw materials at the Helmholtz-Institute for Technology of Resources in Freiburg, Germany. Dr. Moeckel´s research projects involve pulverization and homogenization of mineral samples prior to x-ray diffraction (XRD) analysis.

  • Separation of large sample volumes with the AS 450 control

    Particle analysis of large quantities of bulk goods is usually done by vibratory sieving. In most vibratory sieve shakers in the market the sieve stack is mounted on springs which oscillate vertically. However, to evenly distribute the material over the entire sieve surface, the so called 3D vibratory sieving as it is used in the AS 450 control is the most suitable method.

  • Sieving of agglomerating powders with the air jet sieving machine AS 200 jet

    Air jet sieving is usually the method of choice for dry sieving of materials with particle sizes below 40 microns. However, it is also a faster alternative to vibratory sieving of materials of up to 250 microns.

  • Small particles help to preserve the Cologne Cathedral

    The Cologne Cathedral is a venerable old building whose historic substance is preserved by continuing restoration works. Mortar is one of the construction materials that the conservators use for preservation and restoration of the ancient stones. To obtain mortar with optimum quality, the conservators at the cathedral workshop in Cologne use a RETSCH sieve shaker to determine the particle size distribution of the material.

  • The New Planetary Ball Mill PM 300

    Planetary ball mills meet and exceed all requirements for fast and reproducible grinding to analytical fineness. They are used for the most demanding tasks in the laboratory, from routine sample processing to colloidal grinding and advanced materials development. With the new PM 300 RETSCH has developed a powerful tool which offers high sample throughput combined with ease-of-use.

Наръчници (3)

Тестови доклади (49)